How To Install Cable Slide On Crossbow

Assembly Guide

Attaching Optional Quiver

Important: Quiver must be installed

prior to attaching the bow assembly.

• Locate the picatinny track on the underside of

the stock (in front of forearm).

• Slide the quick detach quiver bracket on the

rail. Line up the quick disassemble quiver bracket

with ane of two optional quiver placement

holes. ( Encounter Figure 1) Attach with the spiral

provided.

• Attach quiver past placing it on the quick disassemble bracket

with the plastic studs facing the mounting plate at a

slight angle and twist to secure.

half dozen

Installing Cablevision Slide

When viewing the cable slide from the side, with

the concave surface facing upwardly, discover that ane of

the two cablevision notches is positioned deeper into

the cable slide than the other. See Figure 2.

IMPORTANT: Cable slide must be installed prior to

attaching the bow associates.

• Employ Barnett lubewax to the elevation of the cable

slide (the office that comes in contact with the un-

derside of the flying track in the stock).

• Place the top cable into the deeper of the two

notches and the bottom cablevision into the more than shal-

low notch on the cable slide. This allows the cable

slide to maintain a relatively level position on meridian

of the two cables. Come across Figure 3.

Fig. 2

Fig. three

Fig. iv

Quiver Placement

holes

Fig. 1

*If you have whatever questions or need any aid during

this step, please call us at (727)234-4999

Deep Groove Shallow Groove

Terminate View of Cable Slide

Source: https://www.manualsdir.com/manuals/53449/barnett-crossbows-penetrator-350.html?page=6

Posted by: moellersaingthad.blogspot.com

Share this post